SS 316/316L, 316Ti Sheets & Plates
India’s Largest Manufacturer & Supplier of SS 316 Sheets, SS 316L Plates, AISI 316Ti Plates, Stainless Steel 316 Hot Rolled Plates, SS 316L Perforated Sheets, Stainless Steel 316Ti Chequered Plates, SUS 316 Shim Sheets Exporter in Mumbai, India
SS UNS S31600 / S31603 / S31635 Sheet Metal Exporter, Stainless Steel 316L Cold Rolled Plates, SS 316Ti Coils, ASTM A240 Stainless Steel 316 Hot Rolled (HR) Sheets, SS WNR 1.4401/1.4404/1.4571 Sheets & Plates, SS 316Ti Galvanized Sheets Dealer, Stockists
We Sunflex Metal Industries are one of the top leading manufacturer, exporter and supplier of SS 316/316L/316Ti Sheets & Plates over India and worldwide. These sheets & plates are having high demand in the market due to its rustproof, temperature resistance, flawless finish and also our experts made them in various sizes, shapes, and thicknesses according to the client’s requirement. These are used in various industrial applications such as medical equipment, food industry, construction material, kitchen utensils, BBQ grill etc.
We offer Stainless Steel 316 Sheets & Plates which are mostly used assortments of stainless steel products. 316 evaluation consists of more nickel amount compared to 304 and hence having more erosion resistance than 304 evaluations. They are usually limited in use to relatively thin sections due to low toughness in welds. SS 316 Plates are used in seawater applications. SS 316 is mostly used in food and pharmacy industry to minimize metallic contamination.
We also offer SS 316L Sheets & Plates which are mostly used in marine applications due to its decent climatic consumption resistance.316L is having low carbon alteration compared to 316 evaluations. Generally, 316L SS sheets are magnetic and cannot be hardened even after the heat treatment. These sheets and plates are having various features like superior durability, high strength to weight ratio, fair resistance to thermal and electrical conductivity, etc. These are also used in soap & photographic handling equipment, architectural, paper process equipment, and so on.
We supply Stainless Steel 316Ti Sheets & Plates which are slowly hardened. SS 316Ti Sheets are used only in cold working, it does not respond to hot working. These are used at 1000 Degree F or higher must have 0.04% minimum carbon. SS 316Ti Plates are used in serious corrosive conditions. By adding an amount of copper to SS 316Ti Plates, it provides corrosion protected properties. These are made from 70% to 90% recycled materials and can recyclable at the end of their lifecycles. Contact us for more information!
Stainless Steel 316 Plate Stockholder, SS 316L Plate Cut To Size, SS 316Ti Strips Stockist, Stainless Steel 316 Plates, Distributors Of ASME SA240 Stainless Steel 316L Coils, SS Grade 316Ti Polished Plates Manufacturer in India
Quick Section Links
- Stainless Steel 316/316L, 316Ti Sheets & Plates Specifications
- Types of SS 316/316L, 316Ti Sheets & Plates
- Chemical Composition of SS 316/316L, 316Ti Sheets & Plates
- SS 316/316L, 316Ti Sheets & Plates Mechanical Properties
- Stainless Steel 316/316L, 316Ti Sheets & Plates Equivalent Grades
- ASTM A240 316/316L, 316Ti Steel Sheets & Plates Price List
- Steel 316/316L, 316Ti Sheets & Plates – Industries & Applications
- Stock Availability of Stainless Steel 316/316L, 316Ti Sheets & Plates
- Why Buy SS 316/316L, 316Ti Sheets & Plates From Sunflex Metal Industries
- Prominent Countries where we Export Stainless Steel 316/316L, 316Ti Sheets & Plates
316/316L, 316Ti Sheets & Plates
Stainless Steel 316/316L, 316Ti Sheets & Plates Specifications
Standard specifications for stainless steel 316/316L, 316Ti Sheets & Plates. If any specification is not mentioned here, you can contact us. We also manufacture and export any custom specification as per clients requirement.
|Specifications||ASTM A240 / ASME SA240|
|Dimensions||ASTM, ASME, and API|
|Width||1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc|
|Length||2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc|
|Surface||2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hairline, sand
blast, Brush, etching, etc
|Finish||Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)|
|Form||Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc|
Types of SS 316/316L, 316Ti Sheets & Plates
|SS 316 Polished Plates||316L SS Polished Plates|
|316TI Stainless Steel Polished Plates||SS UNS S31600 Hot Rolled Plates|
|SS WERKSTOFF NR. 1.4435 Hot Rolled Plates||ASTM A240 316TI Stainless Steel Hot Rolled Plates|
|ASTM A240 316L Stainless Steel Cold Rolled Plates||SS WERKSTOFF NR. 1.4401 Cold Rolled Plates|
|SS UNS S31635 Cold Rolled Plates||ASTM A240 316 Stainless Steel Shim Sheet|
|SS UNS S31603 Shim Sheet||SS WERKSTOFF NR. 1.4571 Shim Sheet|
|316 SS Chequered Plate||316L Stainless Steel Chequered Plate|
|SS 316TI Chequered Plate||316 Stainless Steel Perforated Sheet|
|SS 316L Perforated Sheet||316TI SS Perforated Sheet|
Chemical Composition of SS 316/316L, 316Ti Sheets & Plates
|SS 316||0.08 max||2 max||1.0 max||0.045 max||0.030 max||16.00 – 18.00||2.00 – 3.00||11.00 – 14.00||67.845 min|
|SS 316L||0.035 max||2 max||1.00 max||0.045 max||0.030 max||16.00 – 18.00||2.00 – 3.00||10.00 – 14.00||68.89 min|
|SS 316Ti||0.08 max||2 max||0.75 max||0.045 max||0.030 max||16.00 – 18.00||2.00 – 3.00||10.00 – 14.00||68.395 min|
SS 316/316L, 316Ti Sheets & Plates Mechanical Properties
|Grade||Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|SS 316||8.0 g/cm3||1400 °C (2550 °F)||Psi – 75000, MPa – 515||Psi – 30000, MPa – 205||35 %|
|SS 316L||8.0 g/cm3||1399 °C (2550 °F)||Psi – 75000, MPa – 515||Psi – 30000, MPa – 205||35 %|
|SS 316Ti||8.0 g/cm3||1399 °C (2550 °F)||Psi – 75000, MPa – 515||Psi – 30000, MPa – 205||35 %|
Stainless Steel 316/316L, 316Ti Sheets & Plates Equivalent Grades
|SS 316||1.4401 / 1.4436||S31600||SUS 316||316S31 / 316S33||–||Z7CND17‐11‐02||X5CrNiMo17-12-2 / X3CrNiMo17-13-3|
|SS 316L||1.4404 / 1.4435||S31603||SUS 316L||316S11 / 316S13||03Ch17N14M3 / 03Ch17N14M2||Z3CND17‐11‐02 / Z3CND18‐14‐03||X2CrNiMo17-12-2 / X2CrNiMo18-14-3|
|SS 316Ti||1.4571||S31635||SUS 316Ti||320S31||08Ch17N13M2T||Z6CNDT17‐123||X6CrNiMoTi17-12-2|
ASTM A213 316/316L, 316Ti Steel Sheets & Plates Price List
Sunflex Metal Industries is one of the most competitive suppliers of Sheets & Plates from India. Our prices for 316/316L, 316Ti Sheets & Plates are very competitive. Please click on the request a quote button or click here to request the updated price list and ready stock information along with your requirement. Sunflex Metal Industries maintains a stock of all standard items and can export them at the best price for 316/316L, 316Ti Sheets & Plates.
Steel 316/316L, 316Ti Sheets & Plates - Industries & Applications
Our sheets and plates are used in a wide range of applications and various industries. Below are a few of them:
- Gas Processing Industries
- Petrochemical Industries
- Power Generation Industries
- Food Processing Industries
- Chemical Industries
- Oil & Gas Industries
- Fertilizers Industries
- Paper Industries
Stock Availability of Stainless Steel 316/316L, 316Ti Sheets & Plates
We maintain huge inventories of all standard sizes and grades. Please send us your complete requirement and we will send you the availability with the best quote for 316/316L, 316Ti Sheets & Plates.
Click to send your requirement.
Why Buy SS 316/316L, 316Ti Sheets & Plates from Sunflex Metal Industries
Sunflex Metal Industries is a leading stockist, distributor and supplier of 316/316L, 316Ti Sheets & Plates from India. With more than three decades of experience, we understand the steel industry deeply. We have huge experience of supplying to all major industries across the world. Our team of dedicated experts with stringent quality policy ensures that we supply best-in-class products meeting and exceeding our client’s expectations. Below are a few quick points about why buying from Sunflex Metal Industries will give you an undue advantage:
- Huge inventory of all standard sizes and grades.
- Distributors of all reputed origins and manufacturers.
- Strict quality control policies and highly experienced team.
- Strong logistics & delivery channels.
- Modern Infrastructure with huge storage capacity.
- An ISO 9000:2015 Certified Company.
Prominent Countries where we Export ASTM Stainless Steel 316/316L, 316Ti Sheets & Plates
Exporting Sheets & Plates to Singapore, Malaysia, Hongkong, Thailand, Indonesia, Taiwan. Other countires includes Afghanistan, Albania, Andorra, Austria, Bahrain, Bangladesh, Bhutan, Brunei, Belarus, Belgium, Bulgaria, Cambodia, China, Cyprus, Croatia, Czech Republic, Denmark, Estonia, Egypt, Finland, France, Germany, Greece, Georgia, Hungary, Iceland, Ireland, Italy, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Lebanon, Latvia, Latin America, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Monaco, Maldives, Mongolia, Myanmar (Burma), Nepal, North Korea, Netherlands, Norway, Oman, Poland, Portugal, Pakistan, Palestine, Philippines, Qatar, Russia, Romania, Russia, San Marino, Serbia and Montenegro, Slovakia, Slovenia, Spain, Sweden, Switzerland, Saudi Arabia, South Korea, South Africa, Sri Lanka, Syria, Tanzania, Tajikistan, Thailand, Turkey, Turkmenistan, Ukraine, United Kingdom, United Arab Emirates (UAE), Uzbekistan, Vietnam, Yemen.
We are one of the top:
- Sheets & Plates exporters to Singapore
- Sheets & Plates exporters to Malaysia
- Sheets & Plates exporters to Hongkong
- Sheets & Plates exporters to Thailand
- Sheets & Plates exporters to Indonesia
- Sheets & Plates exporters to Taiwan